top of page

THE AUDIO-CLARITY LOUDSPEAKER SUSPENSION SYSTEM     

Doc15.a.jpg
A.C.-2-PTS.AMV.jpg
5A-BORA - F.B.-DETAILS.jpg
l-ADAM - CUT -BLACK .jpg

 

THE SPEAKER IS SECURELY HELD IN THE SUSPENSION STRAP USING 3M COMMAND PADS & THE VELCRO HOOK & LOOP SYSTEM.  THE  3M COMMAND PADS ATTACH TO THE LOUDSPEAKER SIDES. THE 3M PADS & VELCRO LOOP MATERIAL SEWN ONTO THE INSIDE OF THE SUSPENSION STRAP 'LOCK INTO' EACH OTHER, SECURING THE SPEAKER.  THE 3M COMMAND PADS ARE EASY TO REMOVE & LEAVE A CLEAN, DAMAGE-FREE SPEAKER SURFACE. 

1. THE 3M PADS ARE ATTACHED TO THE SIDES OF THE SPEAKER.  

2. THE SUSPENSION STRAP IS THEN 'WRAPPED' UP THE SIDE OF THE SPEAKER, AND THE   3M COMMAND PADS & VELCRO LOOP MATERIAL THEN 'LOCK INTO' EACH OTHER,  SECURING THE SPEAKER.  

3. THE SUSPENSION STRAPS HAVE O-RINGS ON EACH END: ONCE THE SUSPENSION STRAP IS ATTACHED TO THE SPEAKER,  YOU LIFT THE SPEAKER UP & PLACE ONE O-RING ONTO EACH END OF THE HORIZONTAL ROD LOCATED AT THE TOP OF THE SPEAKER STAND. 

4. ONCE THE O-RINGS ARE PLACED ON THE HORIZONTAL ROD, YOU MUST ADJUST THEM SO THEY ARE IN LINE WITH THE SIDES OF THE LOUDSPEAKER.   SEE DIAGRAM BELOW.

HOW-IT-WORKS.2bvc.jpg
bottom of page